Need 2 overhead lights installed. Ceiling is pre-wired, and this is a new construction condo.
Pam H
I am assuming I have a short in one of the lines in my living room. There is no power to any of the outlets and the ceiling lights do not work. Need your electrical expertise to diagnose and fix. Thanks.
Jaime H
Sign Up!
List your services, get found on the major search engines.
Tell your potential customers why they would want to choose you. How do you provide the best level of service? What are some of your strengths? How are your employees or partners motivated to be helpful, solve issues, set expectations correctly and deliver happiness to your clients?
Are You a Pro?
List Your Services Here for Free!
Join Us!
Your Business Name
Areas Served:
Services Provided:
e.g.
Electrician - Electrician Questions
1.10How much Should I expect to pay an Electrician to replace a Chandelier?
Q.Hello!
My boyfriend and I are considering a new Chandelier for our dining room, the one that came with the place is quite old and not very chic. I have found one that I like and he has said that he might be able to do it, but I figure if an electrician's fee is not too steep, I would rather a professional do it.
How much do you think replacing a chandelier should cost?
Thank you!
A.Call a local electrician to get a price. Here in the US, I would have no idea what an electrician in Australia charges. The price will depend on whether you get an electrical contractor, or hire an electrician to do it "on the side". Hope this helps.
(No Chosen Answer)
1.10How much should it cost to install a ventilation fan in a bathroom? And what type of contractor would do that?
Q.We have a second story bathroom with a plaster ceiling with an unfinished attic above, leading up to a roof with cedar planks and two layers of shingles above that. We want to hire someone to install a ventilation fan in the ceiling and vent it through the roof. What would be a reasonable price for something like that? And what type of contractor should we look for to do that - electrician, HVAC guy, etc?
A.Anyone who does renovations can install it for you...just make sure he doesn't vent it to the attic because you will have problems with condensation which will affect your plaster ceiling...make sure you discuss the job with him in detail so you know he knows what he's doing...it's not as easy of a job as you'd think.
(No Chosen Answer)
1.00How Do I convert 3 phase Electric to Single Phase.?
Q.I Bought a building that has 3 phase service. What I would like to do is have a 200 amp single phase Breaker on on each Floor (there are 4 Floors total) These can be sub panels or otherwise. My question is how do hook up a Main Distribution panel to tap into the 3 phase panel and maintain a balanced load.
I know this is a dangerous undertaking. I am very experienced in single phase applications But my 3 phase experiance so far has been limited so far to installation of 3 phase motors. In theory I somewhat understand what needs to be done, but I need someone to give me a step by step process to complete this.
** again I understand the risks involved so please do not answer telling me to Hire an Electrician...I am ONE. Just dont know too much about this aspect and Doing it by oneself is the best way to learn**
Thx
If necessary compensation can be arranged.
A.I am sorry, and mean no offense, as you have stated that you don't want to hear this, BUT...
It would be foolish, and possibly hazardous, for anyone to try to explain this to you here. You "say" you "are one," but you also say you don't know about this, and that's the same as not being one where this project is concerned.
You need to sacrifice a little pride and money, and hire a LICENSED MASTER Electrician to go to your job-site and literally POINT to, identify each of the phase legs, and explain which are to be used for your intended project. You don't have to hire him to do the work, only to advise and educate you. How about one of the guys you work with who does this work, he probably would do it for a few beers and laughs.
There is a universal convention for which phase to use for what you want to do, and someone who knows what he/she is doing needs to precisely identify which phase line is which. The reason for this is that whoever originally wired the 3-phase may NOT have followed the convention, and misuse could result in problems.
Better safe than sorry.
(No Chosen Answer)
1.00Questions about doing the big 3 upgrade?
Q.Last year I was about to do this install for my stereo, I bought all the stuff I need and then right when I was about to install it all, I took a reading of my power wire and it seemed to damn high already from what was coming from it. ( I can't remember the voltage because it was a year ago) I showed my uncle that's a mechanic ( not an electrician) and he said that "I wouldn't do it because it's already hi and it might fry lots of things"
I know that the voltage was above 12.6 for sure! maybe 14 something? and that's before I even installed any extra gauge wire. so I just changed my mind and never installed it...I still have everything and I'm wanting to try this again and actually doit but I really don't want to ruin my car or fry all my audio equipment, should I hire a professional shop to do this so then they are liable for any damage?
also - I have a kinetic 1400 battery under my hood powering my car. and my stereo is jl audio amp and sub.
I don't want to buy a HO alt yet. thanks
A.
(No Chosen Answer)
1.00What do contractors charge per square foot to remodel part of an unfinshed existing basement to a bedroom? ?
Q.What do contractors charge per square foot to remodel part of an unfinshed existing basement to a bedroom?
I am looking into converting part of my unfinsihed basement to a bedroom around 12ft x 12ft. There will be no Addition to the house, but there will be remodelling to already existing space putting up some walls to make a bedroom. Ballpark figure thanks.
A.Even a Ball Park figure would be difficult to produce for with out a visit. But lets say, the electrician could be about $1,000.00 total. X 15.15 divided by 144.
(No Chosen Answer)
1.00To remodel my finished basement, what should I expect a contractor to charge for labor?
Q.Do they charge as much as materials cost? More? Less?
I want to refinish my basement. No plumbing. Just new walls. carpet, lighting, moulding, doors and windows.
I figured all materials would be around $5-7k. What would he charge?
A.Depends on how much work there is to do and where in the US you live...you will have to get an electrician and permits for that. I would say it would cost twice as much as the materials. It really just depends on where you live and who you can find. Your best bet is to not look on yahoo answers and to call local contractors and they will give you free estimates.
(No Chosen Answer)
1.00Is this a good price for a basement remodel? How should I pay?
Q.I received a bid today for a partial basement remodel from an acquaintance of mine that I'm pretty confident I can trust.
He quoted me $6,500 to complete 625 square feet. This includes dry wall, the ceilings, outlets, canned lighting, carpet, 3 doors and paint. Is this a pretty good price?
Also, I have a home equity line of credit with 3.75% interest. I think I should use this because it's tax deductable. I can't pay cash and don't want to use a credit card. Well, I could pay half cash and half line of credit but I don't want to break myself paying for this all up front. Is the HELOC a good idea?
Thanks.
wow. Thanks for the detialed advice. Um, yes he is putting 2 x 4 studs in and blowing insulation in. The painting will be contracted out to a painter, the electrical to an electrician and the carpet to a local company. It sounds like the guy is in charge of the job but contracting most of it out. It also includes stipled ceiling, switch installation on dimmers and base/casing (whatever that is).
A.I think you need to get three or four estimates..all need to be written and describing exactly what is included. Write out what you want done to your space, so each contractor can bid accordingly. I have to tell you, I do not like working with friends (unless it is just for an afternoon having dinner or beer as pay). Do not make a decision until you have all the estimates. As for paying..that is a personal decision you need to make on your own or with your financial advisor from the bank. A word of advice..wiring should be done by a licensed electrician and do not cheap out on the recessed lighting.
(No Chosen Answer)
1.00Is $3,500 too much for a 3/4 bath remodel? (this would include gutting and replacing everything)?
Q.We are looking to remodel a 3/4 bathroom in a 2nd vacation residence. It is the only bathroom in the place. We might want to sell in 1-2 years. We are looking to completely gut everything and 1) install stand-up shower, 2) install new toilet and have it relocated to a different spot, 3) replace vanity/sink and have it moved slightly, 4) re-cover walls with either greenboard/drywall or another resistant surface 4) install new vinyl flooring, 5) update any electrical connections.
The bathroom is only 6' 10" x 6' 6". An independent contractor quoted us $3,500 for a full-turnkey remodel (including material/labor/plumbing/electrical/waste removal. This figure is using lowest-cost materials from Lowes. We asked for pure labor and got $1500 - $1800 (so this assumes we buy the materials ourselves).
We thought this was pretty high - we're not looking to do tiles or granite - just the basics. Anyone have an idea what this sort of remodel should cost??
Thank you all for the speedy (and encouraging) replies!! I had a bit of sticker shock initially, so I'm glad to hear that this quote is not out of the ballpark. The contractor actually just built us a deck, so we've worked with him before. This will be the first interior job though.
Right now we're thinking of going with a water-resistant wall-board (Aqua Tile?) instead of doing drywall or tiles. This stuff doesn't look bad and is $12 for a 4' x 8' sheet. The standup shower is pre-molded, but this stuff would go everywhere else. This contractor built us a small deck before, so it's not our first job with him. But, he has to bring a plumber and electrician on board for this. Thanks again for your feedback!
A.I don't think the price is out of line, especially the labor only.
Is he connecting to existing plumbing?
If you buy the materials, I think you can get better fixtures included in a price of $1,700.00
Ask a few other contractors for estimates. 8/26
(No Chosen Answer)
More Electrician Questions
Electricians
Looking for a certified electrical contractor in Flint? Allow us to hook you up with approved and certified electricians in the Flint area. We are the most reputed contractor matching service, helping connect thousands of Flint customers everyday to certified, approved and bonded local electricians. Our system is renowned for its speed, accuracy of matches, efficiency, and most importantly the protection of your privacy.
Looking for a certified electrical contractor in Flint? Allow us to hook you up with approved and certified electricians in the Flint area. We are the most reputed contractor matching service, helping connect thousands of Flint customers everyday to certified, approved and bonded local electricians. Our system is renowned for its speed, accuracy of matches, efficiency, and most importantly the protection of your privacy.